| |
Magnetic Analysis Boardman Ohio Test Facility
|
|
Tired of Having to Turn Down Job Orders
Due to a Lack of Qualifying NDT Equipment?
|
|
Let MAC come to the rescue with its advanced NDT equipment and Boardman Ohio testing facility that not only meets ASTM specifications,
but those of the client as well!
|
|
With over 80 years of experience, MAC not only provides the sale and lease of NDT equipment but also provides testing services at its Boardman, Ohio testing facility. Mill’s that are not fully equipped to handle specific requests by their customers may ship their material to MAC’s testing facility where MAC’s knowledgeable and fully ASNT certified level I, II, and III staff of engineers will work in collaboration with the mill to provide the best service and results possible- rating second to none!
|
| Optimizing Test Results |
 With Rotary and Coil Eddy Current equipment such as the MultiMac , and Rotary Ultrasonic testing equipment such as theEchomac, the Boardman testing facility can accurately detect a wide range of defects in carbon steel, stainless & specialty steel, copper, and aluminum tube or bar. The facility is ISO 17025:2005 accredited. Testing standards supported by MAC’s advanced testing equipment and facility includes various ASTM, AMS, ASME and Military specifications.
To the left is a picture of one of many test confugurations provided by MAC. This system consists of an encircling eddy current rotary and an ultrasonic rotary mountedon a dual pinch V Roll bench. In this instance, long, continuous seam type surface defects as well as subsurface and internal defects are being detected.
To meet today’s most demanding specifications, a combination test using both eddy current and ultrasonic (at 100% coverage)inspection technologies ensures the detection of surface, subsurface and internal defects in bar as well as longitudinal and transverse, OD and ID defects in tube. Wall thickness measurement in tube down to .0001”, and alloy or hardness verification can also be provided. Additional defects and descriptions may be found in our testing tube or testing bar website pages.
|
| Testing Capabilities |
|
There are 2 lines equipped to handle material from 0.100” to 1.250” in diameter and 0.250” to 3.000” in diameter at a maximum length of 24 feet. Customized solutions may be provided by MAC’s experienced engineers and superior procedures to satisfy your specific requirements.
The addition of an over head crane allows the facility to handle full truck loads of material, thus making it possible to inspect up to thousands of feet of material per day. Turn-around time is usually within 1 week, with faster times available with advanced notification.
The facility is capable of receiving and shipping to and from any location in the United States (and some overseas locations as well).
|
|
For more information, please contact:
|
|
| | Home | Top of Page |
|
| |
