| |
|
|
| |
| Standard and customized parts testers and sorters are available and have been developed for a wide range of metal parts including fasteners, bearings, automotive and military ordnance parts. |
| |
| Typical flaws and conditions that can be detected include: |
| |
| |
- Cracks
- Variations in alloy, grade, heat treatment
|
- Some dimensional variations
- Unwanted inclusions
|
|
|
| |
| Testing Parts |
| |
570 Parts Gate |
Fasteners, Bearings, & Similar Parts
MAC eddy current test systems are available to test fasteners and similar parts for heat treatment, geometry, and alloy. The systems test and separate out parts that are either above or below specification from those that conform. This test can be done at very high speeds, using MAC's Autosort parts gate and Varimac comparator tester.
|
| |
Bearing Races |
Automotive Parts
Parts for automotive applications, such as fasteners, bearings and similar parts can be tested as described above. MAC also has systems to detect flaws in automotive parts such as pistons and strut rods. These systems incorporate mechanics and control logic to orient and manipulate the part through the test, including marking and sorting.
|
| |
| |
Custom Test System for Grenades |
Military Ordnance
MAC has designed and built complex multi test systems to inspect military ordnance including, grenades, shell bodies, and aluminum shell base.
|
| |
| Detecting Flaws and Conditions |
| |
Standard Parts Test System
MAC standard parts testers usually utilize the Varimac V eddy current comparator with an automated parts sorting gate to separate parts into three categories - above specification, below specification and acceptable.
|
| |
Customized Parts Testers
Highly sophisticated customized parts testers using multiple test technologies and appropriate automated handling equipment have been developed and produced for inspecting military shell bodies, grenades, bearing races, and automotive parts, among others. MAC Design Engineers bring many years of experience in successfully developing Custom Systems to apply nondestructive test techniques and material handling to a range of metal parts.
|
| |
